Special Dedectors

Schrack Seconet Special Dedectors

Linear (Linear Type / Beam Type) Smoke Detector

lineer duman dedektörü

 
Linear smoke detectors usually consist of a transmitter and receiver (can be in the mirror) unit mounted between 3 and 150 m. In case of fire, rising smoke reduces the infrared beam intensity between the transmitter and receiver and an alarm is transmitted to the fire alarm control panel.
 

Aspirating Smoke Dedectors

hava emişli yangin dedektoru

Universal air suction smoke detectors are used for large viewing areas (for example, high-rise shops, frozen storage, big data centers, historical buildings, large high halls, etc.).
 

 

Air suction systems have one or two independent sampling tubes, each with an evaluation unit and an internal smoke sensor. A high-performance fan transfers air from the monitored area to the evaluation unit via sampling pipes, where any increase in smoke concentration is detected immediately.

Line Type Heat Dedectors

line type isi dedektorleriline type heat detectors Line heat detectors are used for more aggressive and critical atmospheric conditions (eg high humidity, extreme temperatures, outdoor areas, corrosive gases, dust pollution, etc.) where conventionally used detectors cannot be used. Heat detectors will be required due to large viewing areas / distances. Possible areas for distribution include cable ducts, parking lots, cold storage, industrial property protection, e.g. It can be used in conveyor belt systems, production lines, loading ramps, refineries, incineration plants, sawing works, agricultural areas and many more.

Flame Dedectors

flame alev dedektorleriFlame detectors Especially at high temperatures, ammunition tanks, hydrogen, silanes, turbines, etc. It is suitable for use in areas and offers the highest degree of endurance, even if multiple irritating sources are present at the same time (electric arc, sunlight, etc.).

Radio Fire Dedectors

kablosuz yangin dedektorleriWireless fire detectors Wireless fire detection detectors and units can be used in areas where the structural aspects of fire alarm systems or certain operations do not allow cable routing (for example, in historic buildings, hotels, museums, etc.).

Fire Dedection Units

yangin algilama uniteleriFire detection elements are used in areas with higher ambient temperatures (eg saunas, near boilers, etc.) and operate according to different expansion principle. Heating results in various degrees of linear expansion that cause the contacts to close. The touch point (setpoint) is preset at the factory.

 

 

Schrack seconet Special Dedectors